Our Scandinavian redwood wall post is crafted specifically for mounting on the inner surfaces of brick walls, pillars, or concrete posts. Scandinavian redwood is not only exceptionally appealing but also an environmentally sustainable timber choice. We've chosen premium-grade redwood, ensuring the selection of the finest softwood pieces with fewer knots.
Measuring 95mm in width and 70mm in thickness (with a 70mm projection from the wall), these posts are available in lengths ranging from 930mm to 2430mm. If you require a precise measurement, you can opt for the measurement just above your desired length and specify the exact dimension in the additional details section. Be assured, we'll confirm this before shipping your order.
The post will rise approximately 30mm above the gate, allowing the angle to align the post's interior with the gate's height.
These posts are exceptionally well-suited for supporting gates up to 2.5m in width and 2.6m in height.
To facilitate efficient water drainage and bolster the post's longevity, the top is thoughtfully designed with an angled structure to effectively prevent water accumulation.
Scandinavian Redwood 95mm x 70mm Wall Post with Angled Top
£25.00
Size guide
Single gate:
- Take the smallest measurement.
- Take off the thickness of the posts (our wall posts are 45mm each)
- Take off 30mm (15mm either side) for expansion and movement.
- This is the width of the gate required.
Example of a gate with 2x matching wall posts:
Gap size: 970mm
Take off 90mm for the posts: 880mm
Take off 30mm for movement and expansion: 850mm
Gate width required: 850mm
Single gate height:
- Order the height of the gate you require from the bottom of the gate to the top of the horns at the side of the gate.
- We recommend leaving a 30mm gap below the gate when installing.
Double Gates
- Take the smallest measurement.
- Take off the thickness of the posts (our wall posts are 70mm each)
- Take off 45mm (15mm gaps for either side and in the centre) for expansion and movement.
- This is the width of the gate required.
Example of a gate with 2x matching wall posts:
Gap size: 3535mm
Take off 140mm for the posts: 3395mm
Take off 45mm for movement and expansion: 3350mm
Gates width required: 3350mm (gates tight together)
Double gates height:
- Order the height of the gate you require from the bottom of the gate to the top of the horns at the side of the gate.
- We recommend leaving a 30mm gap below the gate when installing.
Please select all options.
Our Scandinavian redwood wall post is crafted specifically for mounting on the inner surfaces of brick walls, pillars, or concrete posts. Scandinavian redwood is not only exceptionally appealing but also an environmentally sustainable timber choice. We've chosen premium-grade redwood, ensuring the selection of the finest softwood pieces with fewer knots.
Measuring 95mm in width and 70mm in thickness (with a 70mm projection from the wall), these posts are available in lengths ranging from 930mm to 2430mm. If you require a precise measurement, you can opt for the measurement just above your desired length and specify the exact dimension in the additional details section. Be assured, we'll confirm this before shipping your order.
The post will rise approximately 30mm above the gate, allowing the angle to align the post's interior with the gate's height.
These posts are exceptionally well-suited for supporting gates up to 2.5m in width and 2.6m in height.
To facilitate efficient water drainage and bolster the post's longevity, the top is thoughtfully designed with an angled structure to effectively prevent water accumulation.
Planting a new tree with every order!
Ecologi allow Stellar Gates to help combat deforestation by planting a new tree for every one of our orders. Trees are planted all over the world!
Also, see our sustainability page for details on our FSC certified materials.