Wooden Sliding Gates - Village Design

£650.00

( / )
Unavailable

Size guide

If you require more exact measurements than what is available on the website, please choose the closest measurement above that you require, and add your exact sizes in the additional comments box. You will then receive an edited order with the revised sizes.

Click here for size guide for single gates.
Click here for size guide for double gates.

Single gate:

Single gate width:

  • Take the smallest measurement.
  • Take off the thickness of the posts (our wall posts are 45mm each)
  • Take off 30mm (15mm either side) for expansion and movement.
  • This is the width of the gate required.

Example of a gate with 2x matching wall posts:

Gap size: 970mm

Take off 90mm for the posts: 880mm

Take off 30mm for movement and expansion: 850mm

Gate width required: 850mm

 

Single gate height:

  • Order the height of the gate you require from the bottom of the gate to the top of the horns at the side of the gate.
  • We recommend leaving a 30mm gap below the gate when installing.

 

Double Gates

Double gates width:

  • Take the smallest measurement.
  • Take off the thickness of the posts (our wall posts are 70mm each)
  • Take off 45mm (15mm gaps for either side and in the centre) for expansion and movement.
  • This is the width of the gate required.

Example of a gate with 2x matching wall posts:

Gap size: 3535mm

Take off 140mm for the posts: 3395mm

Take off 45mm for movement and expansion: 3350mm

Gates width required: 3350mm (gates tight together)

 

Double gates height:

  • Order the height of the gate you require from the bottom of the gate to the top of the horns at the side of the gate.
  • We recommend leaving a 30mm gap below the gate when installing.

 

Please select all options.

Get in touch

Notify me when this product is available:

Our Wooden Sliding Gates are made from Scandinavian Redwood. This softwood is very sustainable and aesthetically pleasing timber which takes stain very well. It will need to be treated with a preservative and UV protection finish for the best protection against the elements.

These gates are suitable for automated sliders or manual sliders. The full bottom rail allows for the installation of wheels to use with a track for sliding use.

Specifications:

Framework: 70mm wide x 70mm thick
Bracing: 95mm wide x 45mm thick
Bottom rail: 95mm wide x 70mm thick (with rebate to allow for the T&G boards)
T&B boards: 85mm wide x 15mm thick

The gates will come in three parts with pre-drilled holes and threaded bar to allow them to be bolted together.

For any changes to this standard design, please get in touch prior to order.

Planting a new tree with every order!

Planting a new tree with every order!

Ecologi allow Stellar Gates to help combat deforestation by planting a new tree for every one of our orders. Trees are planted all over the world!

Also, see our sustainability page for details on our FSC certified materials.