Size guide
If you require more exact measurements than what is available on the website, please choose the closest measurement above that you require, and add your exact sizes in the additional comments box. You will then receive an edited order with the revised sizes.
Click here for size guide for single gates.
Click here for size guide for double gates.
Single gate:
Single gate width:
- Take the smallest measurement.
- Take off the thickness of the posts (our wall posts are 45mm each)
- Take off 30mm (15mm either side) for expansion and movement.
- This is the width of the gate required.
Example of a gate with 2x matching wall posts:
Gap size: 970mm
Take off 90mm for the posts: 880mm
Take off 30mm for movement and expansion: 850mm
Gate width required: 850mm
Single gate height:
- Order the height of the gate you require from the bottom of the gate to the top of the horns at the side of the gate.
- We recommend leaving a 30mm gap below the gate when installing.
Double Gates
Double gates width:
- Take the smallest measurement.
- Take off the thickness of the posts (our wall posts are 70mm each)
- Take off 45mm (15mm gaps for either side and in the centre) for expansion and movement.
- This is the width of the gate required.
Example of a gate with 2x matching wall posts:
Gap size: 3535mm
Take off 140mm for the posts: 3395mm
Take off 45mm for movement and expansion: 3350mm
Gates width required: 3350mm (gates tight together)
Double gates height:
- Order the height of the gate you require from the bottom of the gate to the top of the horns at the side of the gate.
- We recommend leaving a 30mm gap below the gate when installing.
