Home Collections Wooden Side Gates (Softwood) Wooden Side Gate - Village Design (695mm x 1800mm) Jet Black

A single black softwood gate in a village design

The back of a single black softwood gate in a village design

SPECIAL SHOWROOM CLEARANCE PRICE!

We have our softwood village design side gates made and in stock ready to dispatch immediately. Depending on your area, delivery time would be in 3-7 days from order.

There are 4 in stock ready for dispatch.

These gates are made from Scandinavian redwood and finished in a Zinsser primer and jet black top coat stain.

Width: 695mm

Height: 1800mm

We recommend leaving 15mm either side of the gate for expansion and movement.

You can also purchase wall posts, hardware kits and a lock if required.

If you need any help or advice, just contact us on 01925 387008 or hello@stellargates.co.uk!

Wooden Side Gate - Village Design (695mm x 1800mm) Jet Black

£250.00 £480.00

( / )

Unavailable

Size guide

If you require more exact measurements than what is available on the website, please choose the closest measurement above that you require, and add your exact sizes in the additional comments box. You will then receive an edited order with the revised sizes.

Click here for size guide for single gates.

Click here for size guide for double gates.

Single gate:

Single gate width:

Take the smallest measurement.
Take off the thickness of the posts (our wall posts are 45mm each)
Take off 30mm (15mm either side) for expansion and movement.
This is the width of the gate required.

Example of a gate with 2x matching wall posts:

Gap size: 970mm

Take off 90mm for the posts: 880mm

Take off 30mm for movement and expansion: 850mm

Gate width required: 850mm

Single gate height:

Order the height of the gate you require from the bottom of the gate to the top of the horns at the side of the gate.
We recommend leaving a 30mm gap below the gate when installing.

Double Gates

Double gates width:

Take the smallest measurement.
Take off the thickness of the posts (our wall posts are 70mm each)
Take off 45mm (15mm gaps for either side and in the centre) for expansion and movement.
This is the width of the gate required.

Example of a gate with 2x matching wall posts:

Gap size: 3535mm

Take off 140mm for the posts: 3395mm

Take off 45mm for movement and expansion: 3350mm

Gates width required: 3350mm (gates tight together)

Double gates height:

Order the height of the gate you require from the bottom of the gate to the top of the horns at the side of the gate.
We recommend leaving a 30mm gap below the gate when installing.

Please select all options.