Our Birchwood design hardwood side gate is a little bit different with bars and a downward arched top. Like all of our gates, it is made with a 70mm framework, 95mm x 45mm bracing and inset boards. Made from the beautiful and durable Iroko hardwood, it would make a very attractive addition to any home. Our frames are attached by mortice, tenon and dowelled joints. This has proved the strongest and most reliable build to keep gates lasting longer and looking attractive.
You also have the choice of either black hardware or galvanised hardware.
Our gates are made on order. We will email you once the gate has been dispatched and our third-party courier will call you to make sure you are in to check and sign for your side gate on arrival. Stellar Gates aim to please all customers and pride ourselves on quality products and good honest service. If you have any questions regarding your order then please do not hesitate to get in touch on 01925 387008 or hello@stellargates.co.uk.
Hardwood Side Gate - Birchwood Design
£625.00
Size guide
Single gate:
- Take the smallest measurement.
- Take off the thickness of the posts (our wall posts are 45mm each)
- Take off 30mm (15mm either side) for expansion and movement.
- This is the width of the gate required.
Example of a gate with 2x matching wall posts:
Gap size: 970mm
Take off 90mm for the posts: 880mm
Take off 30mm for movement and expansion: 850mm
Gate width required: 850mm
Single gate height:
- Order the height of the gate you require from the bottom of the gate to the top of the horns at the side of the gate.
- We recommend leaving a 30mm gap below the gate when installing.
Double Gates
- Take the smallest measurement.
- Take off the thickness of the posts (our wall posts are 70mm each)
- Take off 45mm (15mm gaps for either side and in the centre) for expansion and movement.
- This is the width of the gate required.
Example of a gate with 2x matching wall posts:
Gap size: 3535mm
Take off 140mm for the posts: 3395mm
Take off 45mm for movement and expansion: 3350mm
Gates width required: 3350mm (gates tight together)
Double gates height:
- Order the height of the gate you require from the bottom of the gate to the top of the horns at the side of the gate.
- We recommend leaving a 30mm gap below the gate when installing.
Please select all options.
Our Birchwood design hardwood side gate is a little bit different with bars and a downward arched top. Like all of our gates, it is made with a 70mm framework, 95mm x 45mm bracing and inset boards. Made from the beautiful and durable Iroko hardwood, it would make a very attractive addition to any home. Our frames are attached by mortice, tenon and dowelled joints. This has proved the strongest and most reliable build to keep gates lasting longer and looking attractive.
You also have the choice of either black hardware or galvanised hardware.
Our gates are made on order. We will email you once the gate has been dispatched and our third-party courier will call you to make sure you are in to check and sign for your side gate on arrival. Stellar Gates aim to please all customers and pride ourselves on quality products and good honest service. If you have any questions regarding your order then please do not hesitate to get in touch on 01925 387008 or hello@stellargates.co.uk.
Planting a new tree with every order!
Ecologi allow Stellar Gates to help combat deforestation by planting a new tree for every one of our orders. Trees are planted all over the world!
Also, see our sustainability page for details on our FSC certified materials.